Attenuation and Infiltration Filter with Telescopic

3P Technik
  • Description
  • More Details

For installation directly in the ground. Material: PE
Connectable roof area to: 213 m²
difference between the inlet / outlet: 0 cm
Connections: DN 100

Please click on the loupe where you will find functional principle and dimensions

Filter for installation in the ground before the rainwater tank.

This specialised filter retains all debris in a stainless steel basket (mesh size 0,55 mm) such that no dirt is washed away into the soakaway or infiltration structure.

This filter is very suitable for equipments where the water is used in washing machines, toilet flushing and garden watering, and for sites in which the rainwater has to be drained off. That means where no connection with a sewer is possible.

All inlets and outlets at DN 100, one inlet can also be used as an emergency overflow. The cleaned rainwater is led through the lower connection into the rainwater tank. Also a calmed inlet can be installed there.

Connection capacity for roof areas up to 200 m².

The cleaned water can be used in washing machines, toilet flushing and garden watering, in homes, in commerce, in public buildings and in industry.

The filter has to be cleaned depending on the contamination several times during the year

1. Rainwater is led onto the filter cartridge.

2. The dirt is detained in the dirt collecting basket. The basket has to be cleaned if necessary.

3. One inlet DN 100 can also be used as an emergency overflow.

4. Cleaned water flows over the inlet DN 100 into the rainwater tank.

Rainwater filter according to DIN 1989-2, Typ B

2 x Connection inlet: DN 100

Outlet into rainwater tank: DN 100

Housing material: Polyethylen

Telescopic extension: Polyethylen

Material filter basket: Stainless steel 1.4301

Mesh size: 0,55 mm