Rainwater-Shop.eu

Simple rainwater diverter for filling rain tanks.

The 3P Rain Collector’s coarse filter separates clean rainwater from the debris coming off the roof. It is suitable for collecting rainwater from
smaller roof areas (up to 50m²).

Fits all common down pipes from 68 mm to 100 mm diameter, and square down pipes 60 x 60 mm.

Features a large 32 mm clean water side outlet for connection to rainwater tank or water butt.

Simple rainwater diverter for filling rain tanks.

The 3P Rain Collector’s coarse filter separates clean rainwater from the debris coming off the roof. It is suitable for collecting rainwater from
smaller roof areas (up to 50m²).

Fits all common down pipes from 68 mm to 100 mm diameter, and square down pipes 60 x 60 mm.

Features a large 32 mm clean water side outlet for connection to rainwater tank or water butt.

Simple rainwater diverter for filling rain tanks, with unique tap function. The 3P Rain Collector’s coarse filter separates clean rainwater from the debris coming off the roof.

It is suitable for collecting rainwater from smaller roof areas (up to 50m²). Fits all common down pipes from 68 mm to 100 mm diameter, and square down pipes 60 x 60 mm. The filter is equipped with a tap, so that the water supply can be regulated, and even completely turned off in winter.

Features a large 32 mm clean water side outlet for connection to rainwater tank or water butt.

The 3P Leaf Separator with filling function is a combination of a leaf separator and rainwater tank filling function.

It can also be used as a pre-filter for leaves and larger dirt particles, but at the same time it can also serve for filling a rainwater butt. The larger dirt is filtered out of the rainwater through the front opening. Therefore, this filter serves also as a protection against the blocking of the sewage pipe.

You can add a hose for filling rainwater tanks to the small integrated 3/4" outlet connection.

Connection possibility for 80 and 100 downpipes, reduction is integrated in the housing.

The 3P Leaf Separator with filling function is a combination of a leaf separator and rainwater tank filling function.

It can also be used as a pre-filter for leaves and larger dirt particles, but at the same time it can also serve for filling a rainwater butt. The larger dirt is filtered out of the rainwater through the front opening. Therefore, this filter serves also as a protection against the blocking of the sewage pipe.

You can add a hose for filling rainwater tanks to the small integrated 3/4" outlet connection.

Connection possibility for 80 and 100 downpipes, reduction is integrated in the housing.

If you have a heavy leaf loading, you should select a 3P Leaf Separator. It sorts out leaves and larger dirt particles, and ejects them from the filter side. The green lid can be shut in winter conditions. The unit is also ideal in larger Rainwater Harvesting Systems, or for filling ponds.

Advantage: No more blocked rainwater gutters and gullies. Accumulating leaves and particles are continuously filtered out.

Install between DN 80 and DN 100 pipes, adapters included. Complete with reduction sets.

For roof areas up to 70 m².

If you have a heavy leaf loading, you should select a 3P Leaf Separator. It sorts out leaves and larger dirt particles, and ejects them from the filter side. The green lid can be shut in winter conditions. The unit is also ideal in larger Rainwater Harvesting Systems, or for filling ponds.

Advantage: No more blocked rainwater gutters and gullies. Accumulating leaves and particles are continuously filtered out.

Install between DN 80 and DN 100 pipes, adapters included. Complete with reduction sets.

For roof areas up to 70 m².

The 3P Filter Collector filters and collects rainwater for water butts and rain tanks. It is made of high quality durable plastic.

The Filter Collector leads clean water to the storage tank with high efficiency under normal rainfall (85 to 95%). The filter can act as the overflow outlet for the tank once filled.

With 2 positions open or closed.

Integrated filter sieve. The mesh is made of stainless steel (mesh size 0,7 x 1,7 mm).

For roof areas up to 70 m².

For installation in downpipes at 68 mm and 110 mm, adapters included.

Easy installation and maintenance.

Complete with adapter and reduction sets.

The 3P Filter Collector filters and collects rainwater for water butts and rain tanks. It is made of high quality durable plastic.

The Filter Collector leads clean water to the storage tank with high efficiency under normal rainfall (85 to 95%). The filter can act as the overflow outlet for the tank once filled.

With 2 positions open or closed.

Integrated filter sieve. The mesh is made of stainless steel (mesh size 0,7 x 1,7 mm).

For roof areas up to 70 m².

For installation in downpipes at 68 mm and 110 mm, adapters included.

Easy installation and maintenance.

Complete with adapter and reduction sets.

Rainwater Filter for installation in the lower section of the downpipe. It is easy to monitor due to its installation position in the downpipe. No need to lift heavy lids or to climb down into storage tanks, as required when filters are installed underground. The downpipe filter where the cleaned rainwater flows out down the filter pipe.

The 3P Rainus is also ideal for refitting of equipments which are not disposing of a filter. Simple installation and maintenance depending on contamination. To clean, slide the filter unit out, and brush off any dirt.

Connection capacity for roof areas up to 70 m²

Max. Flow Rate Sieve insert aprox. 0,6 l/sec = aprox. 2 m³ cleaned water per hour.

Installation in standpipes at Ø 80 or 110 mm. The upper connection can accept metal downpipes of 80 and 100.

The cleaned water can be used in washing machines, toilet flushing and garden watering, in homes, in commerce, in public buildings and in industry.

Rainwater Filter for installation in the lower section of the downpipe. It is easy to monitor due to its installation position in the downpipe. No need to lift heavy lids or to climb down into storage tanks, as required when filters are installed underground. The downpipe filter where the cleaned rainwater flows out down the filter pipe.

The 3P Rainus is also ideal for re-fitting of equipments which are not disposing of a filter. Simple installation and maintenance depending on contamination. To clean, slide the filter unit out, and brush off any dirt.

Connection capacity for roof areas up to 70 m²

Max. Flow Rate Sieve insert aprox. 0,6 l/sec = aprox. 2 m³ cleaned water per hour.

Installation in standpipes at Ø 80 or 110 mm. The upper connection can accept metal downpipes of 80 and 100.

The cleaned water can be used in washing machines, toilet flushing and garden watering, in homes, in commerce, in public buildings and in industry.